JHK Electric Standing Desk 63"x24" - 28.35" to 46.46" Height Range, 3 Memory Presets, 154 lb Capacity, Anti-Collision, <55dB Motor, EPA/CARB - Black, Oak, Rust, White

JHK Electric Standing Desk. 63"W x 24"D Desktop. Height Range: 28.35" to 46.46". 3 Memory Presets (Save + Recall with S Button). 154 lb Weight Capacity. T-Shaped Steel Frame. EPA and CARB Compliant Desktop (2-Piece Assembly). Motor Under 55dB. Anti-Collision Technology. Safety Lock on Power Failure. Assembly Required with Tools + Video. Colors: Black, Oak, Rust, White. Ships from United States.

The JHK 63x24" Electric Standing Desk provides a large 63-inch wide work surface with electric height adjustment from 28.35 inches (seated) to 46.46 inches (standing), covering a wide range of user heights. Three memory presets let you save your preferred sitting and standing heights and recall them instantly with one button press - eliminating the need to manually adjust every time you switch positions. The T-shaped steel frame provides stable support across the full 63-inch desktop width and holds up to 154 lbs of equipment. The motor operates below 55 decibels for quiet operation in open offices and home offices. Anti-collision technology stops and reverses movement if an obstruction is detected during height adjustment. The desktop holds its position even if power is lost mid-adjustment. EPA and CARB compliant desktop materials. Assembly required; all tools, instructions, and an installation video link are included.

Key details before purchasing:

• Desktop ships as 2 pieces that connect during assembly - plan for a 1-2 hour assembly with a second person to assist with lifting the frame
• Height range is 28.35" to 46.46" - check this range suits your seated and standing heights before purchasing (average seated desk height is 28-30"; standing height varies by user height)
• 25.5kg shipping weight - large freight item; confirm delivery access (elevator, ground floor, etc.) before ordering
• No built-in storage, drawers, or cable management tray - plan for separate cable management accessories if needed
• Ships from United States only

Key Features

• 63"x24" desktop - 28.35" to 46.46" height range - The 63-inch width accommodates dual monitors, a laptop, keyboard, mouse, and desk accessories side by side; 24 inches of depth provides comfortable keyboard-to-monitor distance; the 18.11-inch height travel range (28.35" to 46.46") suits users from approximately 5'0" to 6'4" in both seated and standing positions; verify your ideal seated and standing desk heights against this range before purchasing
• 3 memory presets - one-button height recall - Press the S button on the control panel to save your current height to one of 3 memory slots; press the saved preset number to return the desk to that exact height automatically; eliminates manual height adjustment every time you sit or stand; particularly useful when multiple people share the desk at different heights or when switching between sitting and standing throughout the day
• 154 lb weight capacity - T-shaped steel frame - The T-shaped leg and frame structure distributes load evenly across the full desktop width; 154 lbs supports dual monitors, a desktop PC tower, monitor arms, speakers, and all typical desk equipment simultaneously; the T-frame design maintains lateral stability at all height positions
• Motor under 55dB - smooth lift - The electric lift motor operates below 55 decibels, which is approximately the sound level of normal conversation; height adjustments are quiet enough for open office use and video calls; smooth motor operation avoids vibration or shaking of desktop contents during adjustment
• Anti-collision technology + safety lock - The anti-collision system uses resistance detection to stop and reverse the desk movement if an object (chair, cabinet, person's legs) is encountered while the desk is raising or lowering; prevents damage to the desk, frame, and surrounding furniture; the safety lock function keeps the desktop at its current position in the event of a power interruption mid-adjustment, preventing unexpected drops
• EPA and CARB compliant desktop - The desktop material meets EPA and California Air Resources Board (CARB) standards for formaldehyde emissions from composite wood products; relevant for indoor air quality in home and office environments
• 4 color options - Black suits modern and industrial office aesthetics; Oak provides a warm natural wood tone for traditional and Scandinavian styles; Rust offers a warm terracotta tone for eclectic and creative workspaces; White suits minimalist and contemporary setups; select color at checkout
• Ships from United States - Domestic US fulfillment; no import duties or customs delays for US buyers

Specifications

• Brand: JHK
• Desktop Size: 63"W x 24"D
• Height Range: 28.35" to 46.46"
• Weight Capacity: 154 lbs
• Memory Presets: 3
• Motor Noise: Under 55dB
• Frame: T-shaped steel
• Desktop: EPA and CARB compliant engineered wood (2-piece)
• Safety: Anti-collision, power-failure safety lock
• Colors: Black, Oak, Rust, White
• Shipping Weight: 25.5kg
• Assembly: Required (tools, instructions, and video included)
• Ships From: United States

Frequently Asked Questions

What height range does this desk cover and will it work for my height?
The desk adjusts from 28.35 inches (lowest) to 46.46 inches (highest). For seated use, ergonomic guidelines recommend a desk height where your elbows are at approximately 90 degrees with your forearms parallel to the floor while seated in your chair. For most people in a standard office chair (seat height 17-21 inches), a desk height of 27-30 inches is comfortable seated - the 28.35-inch minimum suits this well. For standing use, the ideal desk height is where your elbows are at 90-100 degrees while standing; for a person 5'4" tall this is approximately 38-40 inches, for 5'10" approximately 41-43 inches, and for 6'2" approximately 44-46 inches. The 46.46-inch maximum comfortably accommodates users up to approximately 6'3"-6'4" in standing position. If you are taller than 6'4", measure your ideal standing desk height before purchasing to confirm it falls within this range.

How do the 3 memory presets work?
The memory presets allow you to save up to 3 specific desk heights and recall them with one button press. To save a height: adjust the desk to your desired position using the up/down buttons on the control panel, then press and hold the S (save) button followed by the preset number (1, 2, or 3) until the display confirms the save. To recall a saved height: press the preset number button and the desk will automatically motor to that exact saved height. A typical setup is Preset 1 for your seated height, Preset 2 for your standing height, and Preset 3 for a second user's preferred height. This eliminates the need to manually adjust the height from scratch every time you switch between sitting and standing, which is the key to actually using a standing desk consistently throughout the day.

How difficult is assembly and how long does it take?
Assembly requires connecting the two desktop pieces, attaching the T-shaped frame legs, mounting the control panel, and routing the motor cable. All tools are included in the box and an installation video is provided to guide each step. For one person working alone, expect 60-90 minutes; two people can typically complete assembly in 30-45 minutes, and a second person is strongly recommended for lifting and holding the frame while bolts are tightened. The heaviest step is flipping the assembled frame and desktop upright - a second person makes this safe and straightforward. The two desktop pieces join with connecting hardware during assembly; the seam is visible but flush when complete. Do not fully tighten all bolts until the entire frame is assembled and level - doing a final alignment check before tightening prevents racking.

How does the anti-collision feature work?
The anti-collision system monitors the motor's resistance as the desk moves up or down. If the desk encounters an obstruction - such as a chair pushed under the desk while it lowers, a cable caught in the frame, or an object on the floor - the motor detects the increased resistance, stops movement immediately, and briefly reverses direction to clear the obstruction. This protects the desk frame, your flooring, and any objects below the desk from being damaged during automatic height adjustment. The sensitivity is set to detect meaningful obstructions without false triggers from the natural friction of the lift mechanism. In practice: clear the area around and below the desk before adjusting height, particularly when lowering; do not push chairs or other furniture under the desk immediately before pressing a preset button.

Is this desk suitable for a dual monitor setup?
Yes - the 63-inch wide desktop comfortably accommodates two monitors side by side. Two 27-inch monitors with stands typically span 48-52 inches total; on a 63-inch desk this leaves 11-15 inches of clear space for a keyboard, mouse, and accessories in front of the monitors. If you use monitor arms (clamped to the desk edge), the full 63-inch surface remains clear for other equipment. The 154-lb weight capacity easily handles two monitors, a PC tower, and all accessories - two typical 27-inch monitors weigh approximately 20-30 lbs combined, well within the limit. For ultrawide or larger monitors, verify the monitor arm or stand width against the 63-inch desktop width. The 24-inch desk depth is adequate for a standard keyboard-to-monitor distance of 20-28 inches.

What happens to the desk position if there is a power outage?
The safety lock function holds the desktop at its current height if power is interrupted during a height adjustment. The desk will not drop or drift when power is lost - the mechanical lock in the lift columns maintains the position. When power is restored, the desk resumes normal operation from its current position. You do not need to re-enter your memory presets after a power interruption - saved presets are stored in the control panel's non-volatile memory and are retained when power is removed. In the event that the desk does not respond correctly after a power interruption, the standard recovery procedure is to lower the desk fully to its minimum height (reset position) and then re-save your presets if needed.